Pool bean bag lounger in Australia: how to choose, use, and care for one
Share
Pool bean bags have become a fixture on Australian decks because they look like outdoor furniture and float when you push them in. They are comfortable, but they are also heavy, slow to dry and awkward to store, and those trade-offs matter more in Australia than most places because they get used hard and left out in strong sun. This guide covers how they work, what to look for, how to use and care for one, and when an inflatable fabric lounger is the smarter buy.
How pool bean bags work
A pool bean bag is a fabric shell filled with something buoyant. Most use expanded polystyrene beads or closed-cell foam pieces. The shell is usually a coated polyester or an outdoor fabric, and the better ones have a mesh panel or drainage holes so water can escape. In the water the fill keeps it afloat and the shell shapes around you. On the deck it works like any other bean bag.
That dual use is the appeal. One piece of furniture does the poolside lounge and the float. The catch is that the same fill that makes it comfortable makes it bulky, and anything that soaks into the shell or sits between the beads takes a long time to leave.
What to look for when choosing one
- Solution-dyed, UV-stable fabric. Australian UV fades and weakens standard printed fabric quickly. Solution-dyed fibres carry the colour through the fibre, not on the surface. Read our guide to olefin outdoor fabric for why that matters.
- Closed-cell fill. Fill that does not absorb water keeps the bag light and stops it sitting lower in the pool after an hour.
- Proper drainage. A mesh base or drainage eyelets let water out instead of pooling inside the shell.
- Double-stitched seams and a covered zip. Seams carry the load when someone drops onto it, and a zip guard stops beads escaping into the filter.
- A size you can lift wet. A full-size bean bag holding water can be a two-person job to get out of the pool. Think about who will be lifting it.
- Chlorine and salt tolerance. If you have a salt water pool, check the maker says the fabric handles salt. Our salt water pool guide covers what to check.
Bean bag vs inflatable fabric lounger
A newer option gives the same outdoor furniture look without the fill. An inflatable fabric lounger has a woven outdoor fabric cover over a welded inflatable core. It floats higher, drains fast and deflates to roll away. Here is how they compare.
| Pool bean bag | Fabric inflatable lounger | |
|---|---|---|
| Feel | Soft, moulds to you | Firm and supportive, like a sun lounger |
| Position in the water | Sits low, more of you in the water | Sits higher, lie flat or recline |
| Weight when wet | Heavy, holds water in the shell and fill | Light, water runs straight off |
| Drying time | Slow, often hours | Fast, usually within the afternoon |
| Storage | Takes its full size all year | Deflates and rolls into a cupboard |
| Mould risk in humid areas | Higher, moisture trapped inside | Lower, nothing to trap water |
Which one suits you
Choose a bean bag if you want one piece that lives on the deck all summer, you like sinking into something soft, and you have covered space to keep it dry. They suit shallow plunge pools and spas where floating is more about sitting than drifting.
Choose a fabric lounger if you want to lie flat and actually float, you are in a humid part of the country, or you need it to pack away. The Floata-Long is 160 by 88 cm with a 45 cm backrest, so it is long enough to stretch out on. The Floata-Round gives the sunk-in, sitting position people like about bean bags, with a 70 cm seat inside a 140 cm ring, and drains as soon as you climb out. For a deeper comparison read fabric vs PVC vs pool bean bag.
How to use a pool bean bag well
- Lower it into the water rather than throwing it, so the seams are not shocked.
- Get on from the side in the shallow end. Climbing on from deep water tips most bean bags.
- Keep sunscreen off the fabric where you can. Oils stain light shells and attract dirt.
- Do not leave it floating overnight. Leaves, insects and the pool cleaner all find it.
Care and storage
Rinse off chlorine or salt with the garden hose after use. Stand the bag on its side so it drains from the base, then dry it in the shade. Direct afternoon sun on a wet shell is hard on the fabric. Once it is fully dry inside, not just on the surface, store it under cover. In the tropical north, check for mould through the wet season. Our cleaning guide and the care page cover fabric floats in more detail.
Delivery and backing
Every Poolboy float is solution-dyed Olefin over a welded TPU core, ships free Australia-wide, comes with 30 days to change your mind and a 12 month warranty. See the full range or find delivery details for Sydney, Melbourne, Brisbane and Perth.
FAQ
Do pool bean bags sink?
A good one does not. The fill is buoyant, but cheaper bags sit lower as the shell and fill take on water, and they get much heavier to lift out.
Can you leave a pool bean bag outside?
Only under cover. Rain keeps the fill wet, which leads to mould and smells, and constant sun breaks down fabric that is not UV stable.
Are pool bean bags safe for kids?
No float is a safety device. Bean bags tip easily in deep water, so children should always be supervised and should not rely on one to stay afloat.
What is the alternative to a pool bean bag?
An inflatable fabric lounger gives the same furniture look, floats higher, dries faster and deflates to store.

















