Poolboy Sinka-Bit
The Sinka-Bit is a floating pool hammock with an open mesh centre between two striped Olefin bolsters. You sit half in the water rather than on top of it, so you stay cool from underneath on the hottest days.
- 145cm long with a 95cm span. The bolsters hold your head and your legs up.
- The mesh drains as you get out. Nothing to soak up, so it never gets waterlogged.
- Olefin bolsters over a welded TPU core. Chlorine, salt, UV and mould resistant.
- Blue, Green, Khaki, Yellow or Black, each striped with white. Pump included, ships flat nationwide.
Also in the range: the Floata-Long pool lounger, and the Floata-Round, a round pool float you sit in.
Delivery2 to 4 working days
- Dispatch 2 to 4 working days, nationwide
- Coverage Kaitaia to Invercargill. Rural addresses take a little longer.
- Arrives Rolled flat and boxed, with the pump in the box
- Setup Inflate through the recessed valve and it is on the water in minutes
Peak season runs from September. Order early if you want it for the first swim.
Warranty12 months, 30 day returns
- Warranty 12 months on everything, excluding punctures and normal wear and tear
- Returns 30 days from delivery for a refund or exchange, in original condition and packaging
If something goes wrong that should not have, call us on 0800 468 836 and we will sort it. Domestic use, original purchaser, proof of purchase. Your rights under the Consumer Guarantees Act apply at all times.
CareRinse, dry, roll
- After a swim Rinse with fresh water and stand it on its side to drain
- Salt pools Rinse every time. Salt dulls fabric, not sunlight
- Storage Air dry before rolling, and store it dry over winter
Olefin is quick drying and resists mould and mildew, so it comes out the same next season.
Does the fabric cover prevent the sticky plastic feeling of traditional floats? COOL TO TOUCH
Olefin is a woven textile so it stays cool to the touch and feels like upholstery. A PVC float heats in the sun and clings to bare skin.
Why does it cost more than a forty dollar float? No PVC
Solution-dyed Olefin woven over a welded TPU core. Not glued PVC, not printed fabric.
Solution-dyed means the colour goes right through the fibre rather than sitting on the surface of it. Think a beetroot rather than a radish. Surface-dyed fabric goes chalky in a season. This does not.
The core is welded rather than glued, so there is no seam to peel apart in year two. It shrugs off chlorine, salt, mould and mildew season after season.
Will it get heavy and waterlogged over time? NO
No. Olefin sheds water rather than absorbing it and the TPU core is non-absorbent. Same weight at the end of the day as the start.
How does it arrive, and how long does it take to set up? Ten minutes
It arrives flat, rolled and boxed, under ten kilos. The pump is in the box, so there is no compressor and no trip to the servo.
Inflate through the recessed valve, close the flap so it sits flush, and it is on the water in minutes.
How do I store it to prevent the fabric from smelling? DRY BEFORE ROLLING
Stand on its side to drain, rinse with fresh water, air dry before rolling. Olefin is quick drying and resists mould and mildew.
Sit in the water, not on it.
The mesh centre lets you sit down into the water rather than perch on top of it, and it drains as you get out. The bolsters keep your head and your feet up.
Give us a call.
Tell us the size of your pool and how you want to use it, and we will tell you which one fits.
0800 468 836