Poolboy Floata-Round
The Floata-Round is a round pool float you sit in, not on. A 70cm seat sinks into the middle of a 140cm ring, so it works like a floating chair: upright, comfortable, drink within reach.
- 140cm across and 125cm deep, with a 70cm seat. A wide base, far harder to tip than a narrow float.
- Solution-dyed Olefin over a welded TPU core. Cool to the touch, never sticky.
- Chlorine, salt, UV and mould resistant, built for more than one summer.
- Cloud, Dusk, Mist or Natural. Pump included, ships flat nationwide.
Also in the range: the Floata-Long pool lounger for lying flat, and the Sinka-Bit floating hammock.
Delivery2 to 4 working days
- Dispatch 2 to 4 working days, nationwide
- Coverage Kaitaia to Invercargill. Rural addresses take a little longer.
- Arrives Rolled flat and boxed, with the pump in the box
- Setup Inflate through the recessed valve and it is on the water in minutes
Peak season runs from September. Order early if you want it for the first swim.
Warranty12 months, 30 day returns
- Warranty 12 months on everything, excluding punctures and normal wear and tear
- Returns 30 days from delivery for a refund or exchange, in original condition and packaging
If something goes wrong that should not have, call us on 0800 468 836 and we will sort it. Domestic use, original purchaser, proof of purchase. Your rights under the Consumer Guarantees Act apply at all times.
CareRinse, dry, roll
- After a swim Rinse with fresh water and stand it on its side to drain
- Salt pools Rinse every time. Salt dulls fabric, not sunlight
- Storage Air dry before rolling, and store it dry over winter
Olefin is quick drying and resists mould and mildew, so it comes out the same next season.
Does the fabric cover prevent the sticky plastic feeling of traditional floats? COOL TO TOUCH
Olefin is a woven textile so it stays cool to the touch and feels like upholstery. A PVC float heats in the sun and clings to bare skin.
Why does it cost more than a forty dollar float? No PVC
Solution-dyed Olefin woven over a welded TPU core. Not glued PVC, not printed fabric.
Solution-dyed means the colour goes right through the fibre rather than sitting on the surface of it. Think a beetroot rather than a radish. Surface-dyed fabric goes chalky in a season. This does not.
The core is welded rather than glued, so there is no seam to peel apart in year two. It shrugs off chlorine, salt, mould and mildew season after season.
Will it get heavy and waterlogged over time? NO
No. Olefin sheds water rather than absorbing it and the TPU core is non-absorbent. Same weight at the end of the day as the start.
Is it stable enough for a child to jump onto? 140CM BASE
The Floata-Round is 140cm across, a wide base, far harder to tip than a narrow float. NOT a lifesaving flotation device.
How does it arrive, and how long does it take to set up? Ten minutes
It arrives flat, rolled and boxed, under ten kilos. The pump is in the box, so there is no compressor and no trip to the servo.
Inflate through the recessed valve, close the flap so it sits flush, and it is on the water in minutes.
How do I store it to prevent the fabric from smelling? DRY BEFORE ROLLING
Stand on its side to drain, rinse with fresh water, air dry before rolling. Olefin is quick drying and resists mould and mildew.
The colour is in the fibre.
Solution-dyed Olefin over a welded TPU core. The colour goes right through the fibre rather than sitting on the surface, so it holds its colour season after season.
Give us a call.
Tell us the size of your pool and how you want to use it, and we will tell you which one fits.
0800 468 836















